For Architects & Interior Designers
We fabricate to your drawings. Architects and interior designers use us as the specialist workshop behind relief murals, feature walls, sculpture and architectural artwork — with the material engineering and installation handled so it does not land on your drawing set.
How we work with design practices
- Fabrication to your drawings, with material advice where it helps.
- Design development from a concept or a mood reference, if that is more useful.
- Sample panels and scale models before commitment.
- Coordination with your programme, contractor and site sequence.
- Installation by our team.
What we can tell you early
The questions that decide a relief or sculpture project are usually technical and usually early: what the wall will take, whether the lighting will work with the relief depth, how the piece will be fixed, and what the finish will actually look like in the specified light.
We would rather answer those at concept stage than after the panel is made. Bring us in early and the answers are free.
Materials we work in
| Material | Use |
|---|---|
| FRP / cast fiber | Interior relief, lightweight fixing, fine detail, any finish |
| GRC | Exterior architectural relief, cast-stone appearance, long life |
| Carved cement | Permanent in-situ relief, monolithic with the wall |
| Fabricated metal | Landmark and feature installations, integrated lighting |
| Wire and mesh | Open, linear forms where sight-lines must be preserved |
Frequently asked questions
Will you fabricate to our drawings without changing the design?
Yes. If we see a technical issue — a wall loading problem, a lighting conflict, a fixing detail that will not work — we will raise it, but the design decision stays yours.
Can you produce a sample before we commit?
Yes, and for anything of significant scale we recommend it. A physical finish sample tells you far more than a rendering, particularly for metallic and patinated surfaces which photograph very differently from how they appear in daylight.
Do you work outside Varanasi?
Yes. We fabricate at our Varanasi studio and install across Uttar Pradesh and beyond — our metal installation work has been placed as far as Noida.
Start a project
Tell us the site, the scale and the date it needs to be in place. We will tell you what is achievable and what it involves.